仮想化関連ソフト/andLinuxのIPアドレス変更方法
の編集
Top
/
仮想化関連ソフト
/
andLinuxのIPアドレス変更方法
[
トップ
] [
編集
|
差分
|
バックアップ
|
添付
|
リロード
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
-- 雛形とするページ --
(no template pages)
#navi(../) 本記事は「[[仮想化関連ソフト/andLinuxのインストールと日本語化]]」の続編になります。 * andLinuxのIPアドレスの変更方法 [#q3256411] andLinuxのIPアドレスはインストール時192.168.11.150になっています。~ 実は、BUFFALOの無線LANルータが192.168.11.*を各マシンに割り当てており、192.168.11.1がゲートウェイになっています。~ したがって、andLinuxを起動するとIPアドレスが原因でインターネットに接続できない状態になってしまいました。~ 早速IPアドレスを直してみます。 #contents #htmlinsertpcsp(win-top.html,win-sp.html) * andLinuxのIPアドレス変更 [#a84263b8] 以下の例は、192.168.11.150から192.168.200.150に変更した時の作業手順です。 * andLinux側の作業 [#abb0057b] ** /etc/network/interfaces ファイルの編集 [#a9eed910] /etc/network/interfacesの編集をします。~ sudo vi /etc/network/interfacesなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/network/interfaces [#s8fc2d20] # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or~ # /usr/share/doc/ifupdown/examples for more information. auto lo eth0 eth1 iface lo inet loopback #iface eth0 inet dhcp iface eth0 inet static~ address 10.0.2.15~ gateway 10.0.2.2~ netmask 255.255.255.0~ iface eth1 inet static~ &color(red){#}; address 192.168.11.150~ &color(red){ address 192.168.200.150};~ netmask 255.255.255.0~ # gateway 192.168.11.1~ &color(red){ gateway 192.168.200.1};~ ** /etc/rc.localの編集 [#o14984a9] /etc/rc.localの編集をします。~ sudo vi /etc/rc.localなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ 既存の行をコピー&コメントアウトしIPアドレスを変更しています。 *** /etc/rc.local [#y06cdbe5] #!/bin/sh -e~ #~ # rc.local~ #~ # This script is executed at the end of each multiuser runlevel.~ # Make sure that the script will "exit 0" on success or any other~ # value on error.~ #~ # In order to enable or disable this script just change the execution~ # bits.~ #~ # By default this script does nothing.~ &color(red){#};mount -t cifs -o credentials=/etc/smbpasswd,iocharset=utf8,codepage=cp932,uid=ユーザID,gid=グループID,dir_mode=0755,file_mode=0755 //192.168.11.1/シェアフォルダ名 /mnt/win~ &color(red){mount -t cifs -o credentials=/etc/smbpasswd,iocharset=utf8,codepage=cp932,uid=ユーザID,gid=グループID,dir_mode=0755,file_mode=0755 //''192.168.200.1''/シェアフォルダ名 /mnt/win}; exit 0 ** /etc/hostsの変更 [#r144298d] /etc/hostsの編集をします。~ sudo vi /etc/hostsなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/hosts [#t6fabd26] 127.0.0.1 localhost~ &color(red){#};192.168.11.150 andLinux~ &color(red){#};192.168.11.1 windows-host~ &color(red){192.168.200.150 andLinux};~ &color(red){192.168.200.1}; &color(red){windows-host};~ # The following lines are desirable for IPv6 capable hosts~ # (added automatically by netbase upgrade)~ ::1 ip6-localhost ip6-loopback~ fe00::0 ip6-localnet~ ff00::0 ip6-mcastprefix~ ff02::1 ip6-allnodes~ ff02::2 ip6-allrouters~ ff02::3 ip6-allhosts ** /etc/profileの変更 [#t088d81b] /etc/profileの編集をします。~ sudo vi /etc/profileなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/profile [#k0957b8e] #!/bin/bash~ # /etc/profile: system-wide .profile file for the Bourne shell (sh(1))~ # and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).~ PATH="/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" if [ "$BASH" ]; then~ PS1='[\u@\h \W]\$ '~ else~ if [ "`id -u`" -eq 0 ]; then~ PS1='# '~ else~ PS1='$ '~ fi~ fi~ export PATH PS1 # set DISPLAY env variable~ &color(red){#};export DISPLAY=192.168.11.1:0.0~ &color(red){#};export ESPEAKER=192.168.11.1:16001~ &color(red){#};export PULSE_SERVER=192.168.11.1~ &color(red){export DISPLAY=192.168.200.1:0.0};~ &color(red){export ESPEAKER=192.168.200.1:16001};~ &color(red){export PULSE_SERVER=192.168.200.1};~ umask 022 # Japanese Input Settings~ export GTK_IM_MODULE=scim-bridge~ export QT_IM_MODULE=scim-bridge~ if [ -f /etc/X11/Xsession.d/80im-switch ]; then~ . /etc/X11/Xsession.d/80im-switch > /dev/null 2>&1~ fi 以上でandLinux側の設定は終了です。 *Windows側の作業 [#zfb0f60c] 本記事で利用しているWindowsはXPです。 ** TAP-ColinuxのIPアドレスを変更 [#y2d79661] +ネットワーク接続でTAP-Colinuxを選択しプロパティをクリックします。 #ref(andlinux-ip-01.png) #br +インターネットプロトコル(TCP/IP)を選択しプロパティ(R)を押します。 #ref(andlinux-ip-02.png) #br +IPアドレスを192.168.200.1に変更します #ref(andlinux-ip-03.png) #br +OKボタンを押していき設定を反映させます。 **Xmingの設定 [#wd9ef35a] 本資料ではandLinuxをC:\Program Files\andLinuxにインストールしました。以下このディレクトリで説明していきます。 **X0.hostsの修正 [#h8f6150a] X0.hostsファイルはC:\Program Files\andLinux\Xmingにあります。 #ref(andlinux-ip-04.png) ***X0.hosts [#sc2faed2] X0.hostsの編集をします。~ 尚、編集した箇所は&color(red){赤字};になっています。~ localhost~ 192.168.&color(red){200};.1~ 192.168.&color(red){200};.150~ 以上でWindows側の修正は完了です。 andLinuxを停止しWindowsを再起動すれば設定が反映されandLinux側のIPアドレスが変わった状態で使用できます。 #br #htmlinsertpcsp(win-btm.html,win-sp.html) #br
タイムスタンプを変更しない
#navi(../) 本記事は「[[仮想化関連ソフト/andLinuxのインストールと日本語化]]」の続編になります。 * andLinuxのIPアドレスの変更方法 [#q3256411] andLinuxのIPアドレスはインストール時192.168.11.150になっています。~ 実は、BUFFALOの無線LANルータが192.168.11.*を各マシンに割り当てており、192.168.11.1がゲートウェイになっています。~ したがって、andLinuxを起動するとIPアドレスが原因でインターネットに接続できない状態になってしまいました。~ 早速IPアドレスを直してみます。 #contents #htmlinsertpcsp(win-top.html,win-sp.html) * andLinuxのIPアドレス変更 [#a84263b8] 以下の例は、192.168.11.150から192.168.200.150に変更した時の作業手順です。 * andLinux側の作業 [#abb0057b] ** /etc/network/interfaces ファイルの編集 [#a9eed910] /etc/network/interfacesの編集をします。~ sudo vi /etc/network/interfacesなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/network/interfaces [#s8fc2d20] # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or~ # /usr/share/doc/ifupdown/examples for more information. auto lo eth0 eth1 iface lo inet loopback #iface eth0 inet dhcp iface eth0 inet static~ address 10.0.2.15~ gateway 10.0.2.2~ netmask 255.255.255.0~ iface eth1 inet static~ &color(red){#}; address 192.168.11.150~ &color(red){ address 192.168.200.150};~ netmask 255.255.255.0~ # gateway 192.168.11.1~ &color(red){ gateway 192.168.200.1};~ ** /etc/rc.localの編集 [#o14984a9] /etc/rc.localの編集をします。~ sudo vi /etc/rc.localなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ 既存の行をコピー&コメントアウトしIPアドレスを変更しています。 *** /etc/rc.local [#y06cdbe5] #!/bin/sh -e~ #~ # rc.local~ #~ # This script is executed at the end of each multiuser runlevel.~ # Make sure that the script will "exit 0" on success or any other~ # value on error.~ #~ # In order to enable or disable this script just change the execution~ # bits.~ #~ # By default this script does nothing.~ &color(red){#};mount -t cifs -o credentials=/etc/smbpasswd,iocharset=utf8,codepage=cp932,uid=ユーザID,gid=グループID,dir_mode=0755,file_mode=0755 //192.168.11.1/シェアフォルダ名 /mnt/win~ &color(red){mount -t cifs -o credentials=/etc/smbpasswd,iocharset=utf8,codepage=cp932,uid=ユーザID,gid=グループID,dir_mode=0755,file_mode=0755 //''192.168.200.1''/シェアフォルダ名 /mnt/win}; exit 0 ** /etc/hostsの変更 [#r144298d] /etc/hostsの編集をします。~ sudo vi /etc/hostsなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/hosts [#t6fabd26] 127.0.0.1 localhost~ &color(red){#};192.168.11.150 andLinux~ &color(red){#};192.168.11.1 windows-host~ &color(red){192.168.200.150 andLinux};~ &color(red){192.168.200.1}; &color(red){windows-host};~ # The following lines are desirable for IPv6 capable hosts~ # (added automatically by netbase upgrade)~ ::1 ip6-localhost ip6-loopback~ fe00::0 ip6-localnet~ ff00::0 ip6-mcastprefix~ ff02::1 ip6-allnodes~ ff02::2 ip6-allrouters~ ff02::3 ip6-allhosts ** /etc/profileの変更 [#t088d81b] /etc/profileの編集をします。~ sudo vi /etc/profileなどとしてファイル編集を行ってください。~ 尚、編集した箇所は&color(red){赤字};になっています。~ *** /etc/profile [#k0957b8e] #!/bin/bash~ # /etc/profile: system-wide .profile file for the Bourne shell (sh(1))~ # and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).~ PATH="/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games" if [ "$BASH" ]; then~ PS1='[\u@\h \W]\$ '~ else~ if [ "`id -u`" -eq 0 ]; then~ PS1='# '~ else~ PS1='$ '~ fi~ fi~ export PATH PS1 # set DISPLAY env variable~ &color(red){#};export DISPLAY=192.168.11.1:0.0~ &color(red){#};export ESPEAKER=192.168.11.1:16001~ &color(red){#};export PULSE_SERVER=192.168.11.1~ &color(red){export DISPLAY=192.168.200.1:0.0};~ &color(red){export ESPEAKER=192.168.200.1:16001};~ &color(red){export PULSE_SERVER=192.168.200.1};~ umask 022 # Japanese Input Settings~ export GTK_IM_MODULE=scim-bridge~ export QT_IM_MODULE=scim-bridge~ if [ -f /etc/X11/Xsession.d/80im-switch ]; then~ . /etc/X11/Xsession.d/80im-switch > /dev/null 2>&1~ fi 以上でandLinux側の設定は終了です。 *Windows側の作業 [#zfb0f60c] 本記事で利用しているWindowsはXPです。 ** TAP-ColinuxのIPアドレスを変更 [#y2d79661] +ネットワーク接続でTAP-Colinuxを選択しプロパティをクリックします。 #ref(andlinux-ip-01.png) #br +インターネットプロトコル(TCP/IP)を選択しプロパティ(R)を押します。 #ref(andlinux-ip-02.png) #br +IPアドレスを192.168.200.1に変更します #ref(andlinux-ip-03.png) #br +OKボタンを押していき設定を反映させます。 **Xmingの設定 [#wd9ef35a] 本資料ではandLinuxをC:\Program Files\andLinuxにインストールしました。以下このディレクトリで説明していきます。 **X0.hostsの修正 [#h8f6150a] X0.hostsファイルはC:\Program Files\andLinux\Xmingにあります。 #ref(andlinux-ip-04.png) ***X0.hosts [#sc2faed2] X0.hostsの編集をします。~ 尚、編集した箇所は&color(red){赤字};になっています。~ localhost~ 192.168.&color(red){200};.1~ 192.168.&color(red){200};.150~ 以上でWindows側の修正は完了です。 andLinuxを停止しWindowsを再起動すれば設定が反映されandLinux側のIPアドレスが変わった状態で使用できます。 #br #htmlinsertpcsp(win-btm.html,win-sp.html) #br
テキスト整形のルールを表示する
添付ファイル:
andlinux-ip-03.png
448件
[
詳細
]
andlinux-ip-01.png
490件
[
詳細
]
andlinux-ip-02.png
480件
[
詳細
]
andlinux-ip-04.png
466件
[
詳細
]